Oxygen Resuscitation Equipment

The OMS^® Oxygen Resuscitation kits include a demand mask and non-rebreather mask for administration of Oxygen to a diver in distress, a pocket mask for rescue breathing and CPR, all packaged in a large OMS^® waterproof hard case. Also included a 9 or 22 cu. ft. cylinder and 2 pin index valve with a 3 in 1 regulator.

This mask is equipped with a Demand System enabling spontaneously breathing patients to inhale 100% Oxygen. An inhalation effort by the patient will open the demand valve and oxygen will flow to the patient at a rate in line with their inhalation effort.

The current standard of care for a first responder sport diver in dealing with a non-breathing patient is oxygen supplemented mouth-to-pocket mask resuscitation. The CPR barrier combines a low-resistance, one-way valve with a hydrophobic filter to help prevent the passage of liquids and secretions. Valve and filter act as barriers separating rescuer and patient.

This mask is supplied with a reservoir bag attached by a one-way valve so the victim can breathe oxygen that is delivered into the bag, but cannot exhale carbon dioxide back into the bag. The nonrebreather is used to deliver high concentrations (as a percent of inspired air, 80% to 90% oxygen at flow rates of 10 to 15 liters per minute) of oxygen.

The OMS^® 3 in 1 Oxygen regulator is so revolutionary that it can be taken almost anywhere. With mulitple gas inlets to choose from and multiple gas outlets to supply Demand or non-rebreather masks you can administer to a diver in distress at almost any place or anytime.

OMS^® has selected the (2) most popular cylinders for portable resuscitation: the C-M9 (9 cu. ft. O2) and the C-M22 (22 cu. ft O2). Both are manufactured to D.O.T (3AL) and TC (3ALM) specification(s), are supplied with post valves (to prevent accidental turn on) and separate hand wheel.

All cylinders are provided with Standard Oxygen green painted shoulder and clear coat externally and corrosion protection internally.